The Catalog

Medical-grade titanium.
Three depths. One alloy.

Every Aquapierced rostral stud is machined from Ti-6Al-4V, the same alloy used in orthopedic implants, and rated 99.7% biocompatible under our internal Cetacean Clinical Compatibility Index.

The flagship deep-water rostral stud.

The Mariana

Our flagship product. Designed for open-ocean bottlenose and pelagic spinner dolphins operating between 200m and 1,000m cruising depths. Mirror-polished finish maximizes laminar attachment and minimizes acoustic reflection back into the melon.

Alloy Ti-6Al-4V (medical grade)
Diameter 3.0 mm
Mass 0.3 g
Depth Rating 1,200 m
Finish Mirror-polished
Agile maneuvering for shallow-water pods.

The Reef

Tuned for tight-radius maneuvers in coral channels and lagoon systems. Slightly smaller profile reduces rotational inertia around the rostrum and permits higher-frequency echolocation tracking of fast-moving prey such as parrotfish and juvenile barracuda.

Alloy Ti-6Al-4V (medical grade)
Diameter 2.4 mm
Mass 0.22 g
Depth Rating 150 m
Finish Satin brushed
Pressure-rated for deep research cohorts.

The Abyssal

Our deepest-capable stud, co-developed with sperm whale researchers. Matte PVD coating suppresses bioluminescent reflection in the aphotic zone, making it nearly invisible to prey while retaining full hydrodynamic benefit.

Alloy Ti-6Al-4V + PVD coating
Diameter 3.6 mm
Mass 0.45 g
Depth Rating 2,000 m
Finish Matte black PVD
Sizing Guide

How to size a rostral stud.

Sizing is determined by rostrum circumference measured 12mm aft of the rostral tip, at the designated installation point. A correctly sized stud sits flush with no rotational play. Below is our recommended sizing chart by species.

SpeciesAvg. circumferenceRecommendedNotes
Bottlenose dolphin (Tursiops truncatus)110–140 mmMarianaAdult reference standard
Spinner dolphin (Stenella longirostris)82–104 mmReefHigh rotational agility preferred
Common dolphin (Delphinus delphis)95–115 mmReef or MarianaInterchangeable at crossover size
Orca (Orcinus orca)320–380 mmMariana ×2 (bilateral)Institutional only
Sperm whale (Physeter macrocephalus)640+ mmAbyssal (custom)Pressure-rated to 2,000m
Installation protocol. All Aquapierced studs are installed under MS-222 mild sedation by a licensed cetacean orthodontist. The procedure takes approximately four minutes. Full recovery is generally observed within the same feeding cycle.